| ADI ADP1043数字电源解决方案 |
| |
| 作者：ADI 来源：中电网 点击数：175 更新时间：2008-4-29 |
|
您可以添加到网摘 让更多人关注此文章：
ADI 公司的ADP1043是次级电源控制器，提供了隔离ac/dc或 dc/dc电源转换控制所需的所有功能，具有最少的元件数，最大的灵活性以及最短的设计时间。她的特性包括遥控电压检测，PWM产生，以及热插拔检测和控制，控制回路是数字的，幷集成了可编程的数字滤波器。它的保护特性包括限流，ac检测，低压锁住（UVLO）和过压保护（ OVP），广泛用在AC/DC电源，隔离的 dc/dc电源，冗余电源，以及服务器，存储设备，网络和通信基础设备。本文介绍了ADP1043的主要特性和应用，功能方框图以及典型应用电路。
ADP1043 Digital Controller for Isolated Power Supply Applications
The ADP1043 is a secondary side power supply controller IC that is designed to provide all the functions that are typically needed in an isolated ac/dc or dc/dc control application.
The ADP1043 is optimized for minimal component count, maximum flexibility, and minimum design time. Features include remote voltage sense, local voltage sense, primary and secondary side current sense, PWM generation, and hot-swap sense and control. The control loop is digital, with an integrated programmable digital filter. Protection features include current limiting, ac sense, UVLO, and OVP (overvoltage protection).
The built-in EEPROM provides extensive programming of the integrated loop filter, PWM signal timing, inrush current, soft start timing and sequencing. Reliability is improved through a built-in checksum and redundancy of critical circuits.
A comprehensive GUI is provided for easy design of loop filter characteristics and programming of the safety features. The industry-standard I2C bus gives access to the many monitoring and system test functions.
The ADP1043 is available in a 32-lead LFCSP package and operates from a single 3.3 V supply.
The ADP1043 is a secondary side controller for switch mode power supplies (SMPS). It is designed for use in isolated redundant applications. The ADP1043 integrates the typical functions that are needed to control a power supply. These include
Output voltage sense and feedback
Digital loop filter compensation
PWM generation
Current sharing
OrFET control
Current, voltage, and temperature sense
Housekeeping and I2C interface
Calibration and trimming
The main function of controlling the output voltage is performed using the feedback ADCs, the digital loop filter, and the PWM block. The feedback ADCs use a patented multipath approach. There is a combination of a high speed, low resolution (fast and coarse) ADC and a low speed, high resolution (slow and accurate) ADC. Loop compensation is implemented using the digital filter. This PID (proportional, integral, derivative) filter is implemented in the digital domain, allowing easy programming of filter characteristics, which is of great value in customizing and debugging designs. The PWM block generates up to six programmable PWM outputs for control of FET drivers and synchronous rectification FET drivers. This programmability allows many traditional and unique switching topologies to be realized.
A current share bus interface is provided for parallel power supplies. The part also has hot-swap OrFET sense and control for N+1 redundant power supplies.
Conventional power supply housekeeping features, such as remote and local voltage sense and primary and secondary side current sense, are included. An extensive set of protections is offered, including overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), undervoltage protection (UVP), ground continuity monitoring, and ac sensing.
All these features are programmable through the I2C bus interface. This bus interface is also used to calibrate the power supply. Other information, such as input current, output current, and fault flags, is also available through the digital bus interface.
The internal 1024-byte EEPROM makes it possible to store all programmed values and allows standalone control without a microcontroller. Approximately 700 bytes of the EEPROM are available for user information, such as version and manufactu-ring date.
The ADP1043 comes with a free downloadable GUI, which provides all the necessary software to program the part.
The ADP1043 operates from a single 3.3 V supply and is specified from 40°C to +85°C.
主要特性：
Integrates all typical controller functions
Digital control loop
Remote and local voltage sense
Primary and secondary side current sense
PWM control
Synchronous rectifier control
Hot-swap sense and control
Current sharing
Integrated programmable loop filter
I2C interface
Extensive fault detection and protection
Extensive programming
Fast calibration
8 Kb EEPROM
Standalone or microcontroller control
主要应用：
AC/DC power supplies
Isolated dc/dc power supplies
Redundant power supplies
Parallel power supplies
Server, storage, network, and communications infrastructure
图1. ADP1043外形图
图2. ADP1043功能方框图
图3. ADP1043典型应用电路
|
没有任何评论
*只显示最新10条评论。评论内容只代表网友观点，与本站立场无关。 更多评论
|
|
发帖须知：
一.所发文章必须遵守《互联网电子公告服务管理规定》;
二.严禁发布供求代理信息,公司介绍,产品信息等广告宣传信息;
三.严禁恶意重复发帖;
四.严禁对个人,实体,民族,国家等进行漫骂,污蔑,诽谤。 |
|
|
|
当前位置：
首页 >> 行业应用 >> 电源系列 >> 解决方案
相关文章
发表评论
