| ADI ADA4939高性能ADC驱动方案 |
| |
| 作者：未知 来源：ADI 点击数：129 更新时间：2008-6-16 |
|
您可以添加到网摘 让更多人关注此文章：
ADI 公司的ADA4939是低噪音超低失真高速差分放大器,它在100MHz的二次谐波系数为-77dBc, 三次谐波系数为-91dBc,3dB增益带宽为1.4GHz,转换速率高达6800V/us,非常适度用来驱动频率DC-100MHz和高达16位分辨率的ADC.本文介绍了ADA4939的主要性能, 失真测量电路图, 单端到差分转换电路图以及驱动AD9445 ADC电路图.
The ADA4939 is a low noise, ultralow distortion, high speed differential amplifier. It is an ideal choice for driving high performance ADCs with resolutions up to 16 bits from dc to 100 MHz. The output common-mode voltage is user adjustable by means of an internal common-mode feedback loop, allowing the ADA4939 output to match the input of the ADC. The internal feedback loop also provides exceptional output balance as well as suppression of even-order harmonic distortion products.
With the ADA4939, differential gain configurations are easily realized with a simple external feedback network of four resistors that determine the closed-loop gain of the amplifier.
The ADA4939 is fabricated using Analog Devices, Inc., proprietary silicon-germanium (SiGe), complementary bipolar process, enabling it to achieve very low levels of distortion with an input voltage noise of only 2.3 nV/√Hz. The low dc offset and excellent dynamic performance of the ADA4939 make it well suited for a wide variety of data acquisition and signal processing applications.
ADA4939主要特性:
Extremely low harmonic distortion
−102 dBc HD2 10 MHz
−83 dBc HD2 70 MHz
−77 dBc HD2 100 MHz
−101 dBc HD3 10 MHz
−97 dBc HD3 70 MHz
−91 dBc HD3 100 MHz
Low input voltage noise: 2.3 nV/√Hz
High speed
−3 dB bandwidth of 1.4 GHz, G = 2
Slew rate: 6800 V/μs, 25% to 75%
Fast overdrive recovery of <1 ns
±0.5 mV typical offset voltage
Externally adjustable gain
Stable for differential gains ≥2
Differential-to-differential or single-ended-to-differential operation
Adjustable output common-mode voltage
Single-supply operation: 3.3 V to 5 V
ADA4939应用:
ADC drivers
Single-ended-to-differential converters
IF and baseband gain blocks
Differential buffers
Line drivers
图1.ADA4939功能方框图
图2.ADA4939失真测量电路图
图3. G=2时ADA4939单端到差分系统电路图
图4.输入和输出采用AC耦合的驱动AD9445 ADC电路图
详情请见:
http://www.analog.com/UploadedFiles/Data_Sheets/ADA4939-1_4939-2.pdf[1]
|
没有任何评论
*只显示最新10条评论。评论内容只代表网友观点，与本站立场无关。 更多评论
|
|
发帖须知：
一.所发文章必须遵守《互联网电子公告服务管理规定》;
二.严禁发布供求代理信息,公司介绍,产品信息等广告宣传信息;
三.严禁恶意重复发帖;
四.严禁对个人,实体,民族,国家等进行漫骂,污蔑,诽谤。 |
|
|
|
当前位置：
首页 >> 行业应用 >> 工业控制 >> 解决方案
相关文章
发表评论
