The IRMD2214SS demo board is an evaluation board for IR2214SS gate driver. With three connected IR2214SS (see the device datasheet), IRMD2214SS is designed to drive 3-phase power modules with pinout compatible to ECONO2-6PACK. The board can drive AC or Brushless motors using power modules with up to 50A output current. The board is a flexible solution for different applications and can be customized providing place for external components. The control signals are 3.3V CMOS compatible; three-phase shunt resistor (with sensing pins) can be placed for current loop control; power module short circuits are managed synchronizing the IGBT turn off in a local network. Board layout reduces the noise coupling between high and low voltage signals and EM emissions.
性能特点:
Up to 1200V DC-bus capability Up to 50A maximum phase current Optional on-board phase shunt resistors 3 x IR2214SS devices connected in 3-phase configuration On-board bootstrap supply for high-side gate drive Full protection of phase-to-phase, DC-bus and ground short circuit by monitoring IGBT
de-saturation
Fault feedback to ground level Internal minimum dead time Anti-shoot-through management Undervoltage lockout 3.3V digital input/output CMOS compatible
功率模块:
Standard ECONO2-6PACK IGBT module compatible IGBT short circuit rated up to 1200V/50A. Easy to mount heat-sink
当前位置：
首页 >> 行业应用 >> 工业控制 >> 解决方案
相关文章
发表评论
